Is your lawn mower refusing to start, leaving you frustrated on a sunny Saturday? You’re not alone. A faulty ignition coil could be the culprit behind that stubborn engine. Knowing how to check if the ignition coil is bad can save you time and money, helping you get back to mowing in no time.
In this article, you’ll learn simple steps to diagnose your mower’s ignition coil. You’ll gain the confidence to troubleshoot the issue yourself and avoid costly repairs. Let’s make sure your lawn mower runs smoothly so you can enjoy that freshly cut grass.
Key Takeaways
- Recognize the Importance: The ignition coil is crucial for generating the high voltage necessary to start and run your lawn mower effectively.
- Identify Symptoms: Key signs of a faulty ignition coil include difficulty starting, engine misfires, rough idling, and poor fuel economy.
- Conduct a Visual Inspection: Look for visible damage such as cracks or corrosion, and check wiring for frays or loose connections.
- Use a Multimeter: Test the ignition coil’s primary and secondary resistance using a multimeter. Readings outside the normal range indicate failure.
- Replace if Necessary: If diagnosed as faulty, replace the ignition coil with a compatible one, ensuring proper installation for optimal performance.
- Seek Professional Help When Needed: If issues persist after replacing the coil or if you’re inexperienced, consult a professional for assistance.
Understanding Lawn Mower Ignition Coils
Ignition coils play a crucial role in your lawn mower’s engine. They generate the high voltage necessary to ignite the fuel-air mixture, enabling your mower to start and run effectively.
What Is an Ignition Coil?
An ignition coil is an electrical component that converts battery voltage into a much higher voltage, typically between 12,000 to 45,000 volts. This high voltage creates a spark at the spark plug, which ignites the fuel mixture. Without a functioning ignition coil, your lawn mower won’t start or run properly.
How Ignition Coils Work
Ignition coils operate using electromagnetic induction. When the mower’s engine turns over, the ignition coil receives low voltage from the battery. This action energizes the coil, causing it to create a magnetic field. As this field collapses, it generates a high voltage surge that is sent to the spark plug.
To illustrate, think of it like a transformer: it takes a small amount of voltage and transforms it into a much larger one, ensuring your engine has the spark it needs. Just remember, if the ignition coil fails, the spark plug won’t receive enough voltage to ignite the fuel, resulting in a mower that won’t start or runs poorly.
Symptoms of a Bad Ignition Coil
Identifying the symptoms of a bad ignition coil can help you address lawn mower issues quickly. Here are some common signs to look for:
Recommended Products
100% brand new-made of new advanced materials, Designed according to specifications, accurate in size, can perfectly replace old products.
Compatible with Briggs & Stratton 593872 799582 798534, please check whether the old accessory model is compatible with this model before purchasing. To ensure you receive the correct parts.593872, 593872 (Used Before Code Date 16012200) and 799582, 84005272.
Common Signs of Ignition Coil Failure
- Difficulty Starting: If your lawn mower struggles to start or doesn’t start at all, the ignition coil might be the culprit.
- Engine Misfires: If the engine misfires or runs unevenly, a faulty ignition coil may fail to generate sufficient voltage.
- Unresponsive Throttle: If you notice a decrease in throttle response, inefficiencies in the ignition coil could be the reason.
- Rough Idling: If the mower shakes or vibrates excessively while idling, an ignition coil problem may exist.
- Poor Fuel Economy: If you’re refueling more often than usual, a malfunctioning ignition coil might lead to inefficient combustion.
Impact on Lawn Mower Performance
Issues with the ignition coil directly affect the lawn mower’s performance. When the ignition coil malfunctions:
- Inconsistent Spark: A bad ignition coil can cause an inconsistent spark, making it hard for the engine to maintain power.
- Reduced Power Output: If the ignition coil isn’t providing adequate voltage, the lawn mower may struggle with heavy grass or inclines.
- Increased Emissions: Poor combustion from a faulty ignition coil can lead to increased emissions and environmental impact.
- Potential Engine Damage: Continuous operation with a bad ignition coil may result in engine damage over time, leading to costly repairs.
Awareness of these symptoms allows you to diagnose issues early, ensuring your lawn mower remains in optimal working condition.
Step-by-Step Guide on How to Check If Lawn Mower Ignition Coil Is Bad
Follow these steps to diagnose a faulty lawn mower ignition coil effectively.
Recommended Products
Fitment: Please make sure this product is compatible with your model before purchasing. Buying the wrong product could result in incompatibility. Fit for 08P502 09P602 09P702 093J02 series engine.Replacement for 799582 ignition coil,lawnmower magneto, 593872 Armature Magneto, coil 798534,lawnmower coil,593872,593872,593872 ignition coil
Briggs gnition Coil Replaces for : 595009 (Used After Code Date 16012100), 593872, 593872 (Used Before Code Date 16012200) and 799582, 84005272.Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts.
High quality replacement for Lawnboy 99-2911 99-2916 92-1152 ignition coil and Briggs and Stratton 684048 684049 Dura Force ignition coil and 801268 ignition coil
Tools Required for the Test
Gather the following tools to inspect and test the ignition coil:
- Multimeter: Measures electrical voltage and continuity.
- Screwdriver: Helps remove ignition coil and access components.
- Wrench Set: Required for loosening bolts on the lawn mower.
- Safety Goggles: Protects your eyes during the testing process.
- Work Gloves: Protects your hands while handling electrical parts.
Visual Inspection of the Ignition Coil
Perform a visual inspection to identify immediate signs of failure:
- Locate the Ignition Coil: It’s usually mounted near the engine block.
- Check for Damage: Look for cracks, corrosion, or burnt areas on the coil.
- Inspect Wiring: Examine the wires for fraying or loose connections, which can disrupt performance.
- Assess the Mounting: Ensure the coil is securely attached; vibrations can affect its function.
If you notice any damage or irregularities, the ignition coil might need replacement.
Testing Ignition Coil with a Multimeter
Use a multimeter to check the ignition coil’s functionality:
- Remove the Coil: Disconnect the spark plug wire and unscrew the ignition coil from the engine.
- Set Multimeter to Ohms: Turn your multimeter to the resistance (ohms) setting.
- Test Primary Resistance: Connect the multimeter probes to the primary terminals of the coil. A typical reading ranges from 0.5 to 5 ohms. If it’s outside this range, the coil is likely faulty.
- Test Secondary Resistance: Move the probes to the secondary terminals. You should see a reading between 5,000 to 20,000 ohms. Readings outside this range indicate a bad coil.
- Reconnect the Coil: Once tested, reinstall the ignition coil correctly.
Completing these checks can confirm whether the ignition coil is malfunctioning.
Troubleshooting Tips
To diagnose issues with your lawn mower ignition coil, follow these detailed steps.
Recommended Products
Engine Spark Plug Tester: Spark plug ignition tester can quickly diagnose ignition and engine problems and defects, troubleshooting spark plug connections, contact points, damaged cables wait. This is a practical diagnostic tool for any engine with spark plugs
Gives a Visual Check of the Ignition System.
Scope of application: The spark plug tester is universal and suitable for testing and troubleshooting small or large internal/external engines such as engines, trucks, automobiles, lawn mowers, marine engines and motorcycles. It is the preferred product in any personal or professional machinery store or automobile garage.
What to Do If the Ignition Coil Is Bad
If you confirm that the ignition coil is faulty, consider these actions:
- Replace the Ignition Coil: Purchase a compatible ignition coil for your lawn mower model. Ensure it’s the right voltage rating.
- Follow Installation Instructions: Remove the old ignition coil by disconnecting wires and unscrewing any fasteners. Install the new coil by reversing the steps. Double-check all connections.
- Test the Mower: After installation, start your lawn mower to check if it runs smoothly. Look for improved engine performance without misfires or stalling.
- Check Other Components: If issues persist, inspect the spark plug and wiring. Replace the spark plug if it shows wear. Ensure all connections are secure and free from damage.
When to Seek Professional Help
Some situations warrant professional assistance:
- Persistent Issues: If the ignition coil replacement doesn’t solve the problem, it might indicate a deeper electrical issue in the mower.
- Lack of Experience: If you’re uncomfortable handling electrical components, a technician can safely diagnose and fix the problem.
- Time Constraints: If you’re short on time, a professional can often resolve these issues more quickly.
Taking these steps helps you maintain your lawn mower, ensuring it works efficiently and reliably while you enjoy your outdoor space.
Conclusion
Now that you know how to check if your lawn mower’s ignition coil is bad you can tackle those starting issues with confidence. By following the steps outlined you can easily diagnose problems and take action before they lead to more significant repairs.
Remember to keep an eye out for those common symptoms and don’t hesitate to perform regular maintenance to keep your mower running smoothly. If you find yourself stuck don’t hesitate to reach out for professional help.
With a little bit of effort you can ensure your lawn mower stays in top shape allowing you to enjoy a beautifully manicured lawn all season long. Happy mowing!
Frequently Asked Questions
What is an ignition coil in a lawn mower?
An ignition coil is an electrical component that converts low battery voltage into high voltage, typically between 12,000 to 45,000 volts. This high voltage creates a spark at the spark plug, igniting the fuel-air mixture necessary for the engine to run.
What are the symptoms of a bad ignition coil?
Common signs of a faulty ignition coil include difficulty starting, engine misfires, unresponsive throttle, rough idling, and poor fuel economy. These symptoms can lead to inconsistent spark and reduced performance.
How can I diagnose a bad ignition coil?
To diagnose a bad ignition coil, perform a visual inspection for cracks or damaged wiring, then use a multimeter to check both primary and secondary resistance. Refer to your lawn mower’s manual for specific resistance values.
What tools do I need to test an ignition coil?
You will need a multimeter, screwdriver, wrench set, safety goggles, and work gloves to test an ignition coil effectively. These tools help ensure safety and proper functionality during the diagnosis.
When should I seek professional help for my lawn mower?
Consider seeking professional help if the ignition coil is faulty, but you’re unfamiliar with repairs, or if the problem persists despite your efforts. Lack of experience or time constraints are also valid reasons to consult a technician.
